-Enhanced the Export/Remove process to require input from the user regarding removing the project from the VidCAD Main Menu, rather than defaulting to Yes. Users must now click Yes or No when prompted about removing the facility.
-Resolved issue with Cable Grid where some multicore cables would not display. All cables now display properly.
-Resolved issue with the Cable Grid where sorting by Date would not arrange items in proper order.
-Resolved issue with Room (Sheet Set) creation where users were not allowed to use a backslash (\) in the room name but were not notified. VidCAD now tells you backslashes are not allowed and lets you rename the Room.
-Resolved issue with Equipment Grid where users could not enter more than 10 characters for rack names and rack positions. The equipment grid now has the exact same restrictions as the Equipment Edit window in the program.
-Resolved issue where new furniture defined on the VidCAD Main Menu, Add Equipment function would display in Diagram drawings Equipment Create selection lists. Furniture created from any area is now excluded from diagram search lists.
-Resolved issue where entering a drawing Revision in the drawing properties on the VidCAD Main Menu would not update the drawing revision field in DWG Props.
-Resolved issue with projects imported into VidCAD SQL 4.2 from version 3.5 or lower would display display a message about the RDCable dates being out of range. The import process now resolves date conflicts properly.
-Resolved issue with creating new Cable Types where a Fatal Error would occur if a user tryed to enter a space in the cable type name. VidCAD now warns that spaces are not allowed.
-Resolved issue with Fast Jack not pulling the next available position in the proper order.
-Resolved issue where the order of jack panel connections were scrambled when using the Phantom Jack Transmutate command.
-Resolved issue with Multicore Cables using Protocol Linetypes that would lock a single linetype for all cables of that signal type to a specific protocol linetype if the first cable added in a drawing was a multicore cable.
-Resolved issue where users would get a Fatal Error if they clicked on the "Pick existing core for pair add" during cable transmutation if there were no multicore cables in the project.
-Resolved issue the the "Cable Number distance from source" field where a value of less than 1 would cause strange cable number placement. VidCAD no longer allows a value of less than 1.
-Resolved issue with Multicore Cable Type definitions in the library where users could add a core without a color definition. VidCAD now requires a core color definition and will copy the core number to serve as the core color definition if no core color is provided by the user.
-Resolved issue that would cauese a Fatal Error if a user tried to delete a core from a multicore cable library definition from the middle of the list. VidCAD now requires users to delete cores from the bottom of the list and work your way up. Example, in an existing 16 core cable type you cannot delete core # 15 without first deleting core # 16.
-Enhanced the Input/Output definition window by widening the connector and line text. This will allow all characters to display without the user having to expand these fields manually.
-Enhanced the New/Clone/Edit equipment create process by returning directly to the main Equipment Create window upon completion. This saves a few clicks each time.
-Resolved issue with router I/O names where users could define connections that had more than 10 characters. VidCAD now pads the High/Low fields properly to three characters and enforces this rule during Input/Output definition.
-Resolved issue with Add Equipment on the VidCAD Main Menu when creating new connectors, the add icon button would go to the last area the user navigated to instead of directly to the ...VidCAD/Library/Connectors window.
-Resolved issue with Add Equipment on the VidCAD Main Menu when creating new connectors, VidCAD would not allow a hyphen (-) in the connector name. VidCAD now allows the use of the hyphen in connectors created from within the program or from the VidCAD Main Menu.
-Resolved issue with the Equipment Create window where model names would not sort alphabetically when a Manufacturer name was entered. VidCAD now sorts all models properly.
-Resolved issue with Custom Connector icons on equipment blocks where the wipeout frame would display. The drawing startup process now turns off wipeout frames automatically.
-Resolved issue with Deleting Jack Panels from a project where the project definition would remain for future jack panels using the same sysname in the same project. Deleting jacks now removes all parts of the jack panel definition.
-Resolved issue with feathers transmutated to jack panels using the 2012 OEM. Cables that went through a jack panel to a feather that is pointed to another jack panel no longer get a fatal error.
-Enhanced general functionality by allowing users to right click on reports to access most reporter controls.
-Enhanced Customize content window by adding a Maximize button for the window.
-Resolved issue with some report definions where some changes would not save.
-Resolved multiple issues with the Wall command where some actions would cause part of the wall to shift to unexpected places.
-Resolved multiple issues with Wall Clean commands (T-Clean, Corner Clean, etc.) where executing the Wall Clean command would cause the wall to shift to unexpected places.
-Resolved multiple issues with the Window and Door commands where executing these commands would cause walls to shift to unexpected places.
-Resolved issue with Architectural Settings displaying bad data and repeating data. All Architectural Settings now store and display correctly.
-Resolved issue with the Change Floor command where new floors created were not saving properly.
-Resolved issue with the Change Floor command where items listed in the Change Floor list were not true Floor names.
The following global editing changes refer to the Equipment Delete, Equipment Rename, Cable Delete and Cable Renumber commands.
-Enhanced all global editing tools to open only drawings where selected cables or equipment are located.
-Enhanced all global editing tools to quit if there is a drawing that could not be updated. A message will display on the command line with informaton on what drawings could not be updated so users can resolve any conflicts (such as another user having a drawing open).
-Enhanced the speed of deleting multiple equipment and cable items by searching for and opening each drawing only once.
-Resolved issue with MFG Display name where the Display name definition was being overwritten by the first word in the full Manufacturer name every time a VidCAD update was run. VidCAD still auto populates blank MFG Display names during updates but will not overwrite any existing definitions.
-Enhanced the Refresh Log command to run much faster on subsequent runs. VidCAD now stores the date Refresh Log was last executed on a project and uses that date to compare the last saved date of a drawing. If a drawing has not been modified since that date, then RL will skip that drawing as there is nothing to update. This will not make the first run of RL take any less time than before, but subsequent runs will take significantly less time.
-Resolved issue with Layer Settings where Grouping Borders and Brackets would turn off if the user turned off the Product Icons layer.
-Resolved numerous issues caused by drawings that have a period (.) in the dwg file name.